Cell counting software
Cell counting software turns an image of cells into a count. CellCount is cell counting software for hemocytometer images: a web app with a free plan that reads the chamber’s grid for the scale (or you place the crossings by hand when the rulings cannot be found), counts live and dead cells by trypan blue exclusion, and gives cells per mL and viability, with every call marked on your image.
Updated
It finds the cells in an image and counts them. That alone is a number per picture; to become a concentration, the software also needs the volume the picture shows, and to give viability it needs to tell a live cell from a dead one. Those two steps are where the kinds of cell counting software differ.
| Kind | What it reads | The volume, for cells per mL | Live and dead | The catch |
|---|---|---|---|---|
| Software that comes with an automated counter | The instrument’s own slides or chambers, imaged inside the instrument. | Fixed by the instrument. | Yes, with the stain the instrument is made for. | Works with that instrument only, and usually its own consumables. |
| General image-analysis software | Almost any microscopy image: nuclei in fluorescence, tissue sections, colonies, cells in a dish. | None of its own: a count per image unless you set a scale and a volume by hand. | Possible, with extra steps you build yourself. | A pipeline to set up and keep working, and no cells per mL without a known volume. |
| Hemocytometer software, such as CellCount | A photo of an improved Neubauer chamber, from a phone at the eyepiece or a microscope camera, or the images a counter exports. | Read from the chamber’s grid in the image. | Yes, trypan blue, built in. | Built for cells in suspension in a counting chamber, not for tissue or plates. |
CellCount is cell counting software for hemocytometer images, a web app with a free plan. Photograph the chamber with a phone at the eyepiece or a microscope camera; CellCount finds the grid by itself (if the rulings cannot be found, you can place the crossings by hand), counts live and dead cells by trypan blue exclusion, and gives viability and cells per mL with the dilution you set.
It is built for one job, cells in suspension in a counting chamber, which is most of what a cell culture lab counts before it seeds, passages or freezes. It is not built for nuclei in fluorescence, tissue sections or colonies on a plate. The word is also spelled haemocytometer, in British English, or hemacytometer, and the device is also called a counting chamber or a Neubauer chamber. See how it reads the grid, and what one image holds.
On 16 images taken straight from a leading automated cell counter, none of which CellCount had seen, Lin’s concordance on cell concentration was 0.91, the mean difference was 0.002 million cells/mL with 95% limits of agreement of ±0.29 million cells/mL, and the live-or-dead call agreed on 95% of the 6,765 cells both readers found. The benchmark, with its plots.
Yes. CellCount has a Free plan with no card and no end date, and the hemocytometer calculator on this site is free with no account at all, for a count you made by hand.
No. A counting chamber and a microscope are enough: a phone held to the eyepiece or a camera on the microscope port takes the photo, and CellCount does the counting and the arithmetic.
Yes. If your automated counter can export its raw frames, CellCount counts the same pixels again and marks every cell, so the two readings can be compared cell by cell.
No. It is a web app that runs in the browser on a laptop or a phone, with nothing to install.
No. It counts cells in suspension in a hemocytometer, in brightfield with trypan blue. For fluorescence nuclei, tissue or colonies on a plate, a general image-analysis program is the better tool.